Hanger on the door from the wire with his hands

Out of place in the cabinets and shelves, or you are looking for an alternative way to store things? This small wire hanger on the door not only adds charm to the room, but also ideal for hanging light items that should always be waiting in the wings in the immediate vicinity. The main feature of hangers it is mounted, clinging directly to the door. And it is very easy to make your own hands! Show imagination, on the rack can be drawn silhouettes of the house or a big city with skyscrapers, mountains and trees, people and animals.

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

You will need a coil wire tight enough that it does not greatly deformed by the weight, pliers and wire cutters, optionally may need a can of paint. Copper or aluminum wire is quite malleable so with them will be easy to work with. If you plan to hang a very light objects – choose a smaller wire diameter, if plans to hang towels or bathrobes – then take the diameter of a little more, but to bend the wire so it will be much harder. Keep in mind that such a hanger on the door may interfere with it closed. Check it out in advance. Alternatively, at the ends of hangers can make loops and fasten it with nails or screws to the door or wall.

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

Start by straightening the wire. Unwind the coil of the main and manually straighten bends, then, with a vise or other improvised Maximize smooth and direct result.

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

After straightening wire proceed to the formation of bends with pliers. Start with loops, if you mount the rack on the wall, or a U-shaped bend, which will hang on a hanger door. Pre-measure the door, not to be mistaken with the depth of the bend. It will be useful to draw a sketch of a life-size hangers and strictly follow it. Bend the wire at an angle of 90 degrees to the U-shaped loop. Then begin to form silhouettes of subjects. For round shapes, use round objects, which can be wound around the wire, rectangular – rectangular or vise.

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

After the average hanger is completed, the wire bend again to create a loop at the other side or the U-shaped bend to the door. Cut off the excess.

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

If desired, coat hanger coat of paint from a container, allow it to dry completely and you’re done!

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

Hanger on the door quietly withstand any legenky things like hats and scarves in the hallway, aprons and potholders in the kitchen, things baby in the nursery.

Hanger on the door from the wire with his hands. Process of making: http://wonderdump.com/hanger-on-the-door-from-the-wire-with-his-hands/

Posted in Ideas for handmade, Ideas for home
Besucherzahler
счетчик для сайта