Make a wonderful Roman blinds hands – easy! Such original curtains, you will be able to create just an hour and a half. Will this detailed master – class!
To make Roman shades with your hands, you will need: a piece of cloth the size of your windows, scissors, twine (ribbon or lace), a stapler, a hammer and a clove (or superglue for plastic windows), roulette, rake thin.
An important stage – the measurement window. Desirably, the width of the curtain was several centimeters larger than the transparent portion of the window, i.e. the curtain should overlap the inner frame. A thin wooden or plastic strap must exactly match the width of the cut tissue.
Mark up the fabric and cut the excess safely. Remember that if the fabric fray or crumble at the edges, it is necessary to give a centimeter on each side to wrap up and hem the edges.
Put the fabric face down on the table, apply to the bottom edge of the rail, and wrap it in a tissue once.
Then, a stapler to attach the fabric to the rail.
As strings can take the string, thin string, decorative cord or ribbon. Measure out the eyeballs of 2.5 times longer than the height of the window, that is, if the window height of 1 meter, then we will have 2.5 meters of string.
We throw the string in the middle of the curtains and putting a rail to the upper edge of the window. If the wooden window – you can nail the bar studs, and if plastic – it is better to stick with glue reliable.
Now our string curtains is in the middle and at the rear and front. It remains only to tie it at the bottom and pull the canvas.
And when you need to fully close the window, simply untie the string!
That’s how you can make wonderful Roman shades with your hands! Notice how it looks favorably vertical bar of the web. Such curtains on the window – a good choice for any room in the apartment, in addition, it will save you a tidy sum.